using two receivers for home theater

  • -

using two receivers for home theater

I have Onkyo TX-SR702 and Pioneer VSX-D1S, both are in mint condition with low usage. In other words, you can have a dedicated 2-channel, controllable, listening option in addition to a dedicated 5.1/7.1 listening option in the same room. A multizone receiver is a good way to get started down the whole-home theater path. Played around with the settings. I think the center/surround idea proposed by minimalist sounds like a good idea. I felt it was hassle not worth. On many 7.1 channel receivers, the user can run the unit in the 5.1 channel mode for the main room and use the two spare channels (normally devoted to the surround back speakers), to run speakers in a second zone.Also, with some receivers, you can still run a full 7.1 channel system in the main room, provided you are not using the second zone set up at the same time. Yamaha's R-N602 and R-N402 Stereo Receivers with MusicCast, Home Audio Systems: A Guide for Beginners. If you are new to the CNET Forums, please read our CNET Forums FAQ. Robert Silva has written about audio, video, and home theater topics since 1998. Thought it might have been that article, that's a really interesting amplifier.Just keep in mind that if you take dual outputs from one amp to one speaker, you're going to have some fun assigning them properly, and organising the surround sound formats to work across two amplifiers.I'd love to hear how it goes, if you do decide to go ahead with it. Usually pre-amp outputs are reserved for the upper-mid to higher level receivers and gets left off of entry level models. The speakers sound great even with one receiver. I know audiophiles use simple A/V receivers to decode (DTS/Dolby) and use huge wattage amplifiers to power up the speakers. In this type of setup, the user can run the second zone with the internal amplifiers of the receiver, and a third or fourth zone using a separate amplifier. The 3 Best High-End Home Theater Receivers of 2020, Home Theater Receiver Connections Explained, How to Use Multichannel Analog Audio Connections in Home Theater, Guide to Home Theater Receivers and Surround Sound, Guide to Wireless Speakers For Home Theater, The Onkyo HT-S3800/HT-S7800 Home Theater-in-a-Box Systems, 5 Ways to Get Audio From a Blu-ray Disc Player. However, some receivers will give you the option of running either Zone 2 or Zone 3 using the built-in amplifiers of the receiver. In addition, many home theater receivers serve as a multi-zone audio distribution system. For full details on how a specific home theater or stereo receiver implements its own Multi-Zone capabilities, you should consult the user manual for that receiver. The external amplifier would be further connected to a set of front left and right front speakers that you specifically use for two-channel audio-only listening. By using Lifewire, you accept our, Other Factors to Consider Using a Home Theater Receiver in Multi-Zone Setups. I'm pretty sure you'd still have issues if you did that too! Zone 2: What Does It Mean in Home Theater? Please tell me if this is feasible. You would also not be using both systems at the same time since they are intended to be used with different sources. What Is a Power Amplifier and How Is It Used? If you are using the receiver to power the second zone, you will still sacrifice the full 7.1 channel capability of the receiver in the main room, and have to settle for 5.1 channel use. You don't have to have both the main and second zone features running at the same time. The volume will be controlled by whichever is sending the pre-amps out to the other.Unless you have hugely inefficient speakers that would need tons of power, I'm not sure I wouldn't just use the extra receiver in another room to power a secondary system. Thank you for being a valued part of the CNET community. Today's receivers are jam-packed with features, the one thing they lack is power. Here are some comparisons between simple […] Currently the speakers are connected only to the HTR-5760 Receiver. This post has been flagged and will be reviewed by our staff. For examples of home theater receivers that provide various levels of Multi-Zone possibilities, check out our lists of the best mid-range and high-end home theater receivers. It is used as as a tuner for AM/FM, Satellite, or internet radio. Emotiva Audio's XPA power amplifier can boost your home theater's sound. And it functions as a multi-channel amplifier that processes and sends sound signals and power to the speakers or subwoofers. If you believe this post is offensive or violates the. This type of system utilizes a properly equipped home theater receiver that can transmit audio wirelessly from designated sources to compatible wireless speakers placed around the house. The 702 is rated @100 watts and VSX @130 with two channels driven. As of December 1, 2020, the forums will switch to a read-only format. It works as a preamp to controls which audio/video (AV) source is selected, such as a Blu-ray Disc player, DVD player, VCR, CD player, or Media Streamer. Only the second person's power is used in the end.I can't think of any easy way to combine the power, short of splitting the input signals into both amps separately, then running dual speaker lines to each speaker. My Home theater speaker setup has 2 Intimus Apreion floor standing Front Speakers, Infinity Beta center speaker, 2 book shelf polk speakers and a Sony 100w powered Sub woofer each dying to get more power. Some of these systems include Sonos, Yamaha MusicCast, DTS Play-Fi, FireConnect (Onkyo), and HEOS (Denon/Marantz). How this setup works is that you would have the home theater receiver setup with a 5.1 or 7.1 channel configuration with 5 or 7 speakers and a subwoofer that you use primarily for home theater listening. Connecting 2 A/V receivers by lgkrish Jan 2, 2010 1:28AM PST I have a HTR-5760 7.1 Channel Digital Home Theater Receiver and also an extra Sony A/V receiver STR-K502P. However wondering if same could be achieved using 2 receivers. Both the Blu-ray or DVD player and CD player are connected to the same home theater receiver but are accessed and controlled separately via additional onboard or remote control options available on the receiver. routed through the receiver to a TV if desired, professional home theater or multi-room system installer, On many 7.1 channel receivers, the user can run the unit in the 5.1 channel mode for the main room and use the two spare channels (normally devoted to the surround back speakers), to run speakers in a, Many 7.1 channel receivers are configured to allow a full 7.1 channel mode for the main room but provide an additional Preamp Line Output. It is important to note that home theater or stereo receivers that have Multi-Zone capability are intended to be used when only a second or third location for music listening or video viewing is needed. Multizone A/V receivers run the gamut from fairly simple to very sophisticated. Appreciate all the ideas and help. For example, the user can watch a Blu-ray Disc or DVD movie with surround sound in the main room, while someone else can listen to a CD player in another, at the same time. then just send the signal to the second amp/receiver. Most user manuals can be downloaded directly from the manufacturer's website. We are grateful for the participation and advice you have provided to one another over the years. Multi-Zone capability in home theater receivers is implemented in three different ways: Multi-Zone receivers may include a variety of interesting features, such as the following: Another interesting way to use the Multi-Zone capable home theater receiver is to use the second zone option in the same room as a 5.1/7.1 channel setup. I have a HTR-5760 7.1 Channel Digital Home Theater Receiver and also an extra Sony A/V receiver STR-K502P. Of course, this setup adds a little more speaker clutter to your room, as you would have two physical sets of front left and right speakers. You can lock in your two-channel source (such as CD player or Turntable) as your designated source for Zone 2. Video from sources components can also be routed through the receiver to a TV if desired. I did connect the front/Sub to the main Yahmaha receiver. I read about connecting A/V receivers to high powered amps. Then you would have an additional external power amplifier that is connected to the receiver's Zone 2 Preamp Outputs, if the receiver provides this option. You could power your towers from one receiver and the center and the surrounds from the second. The concept of plugging into and controlling all of your components with one home theater receiver is a great convenience, but when it comes to Multi-Zone capability there are still other factors to consider: Another option is wireless multi-room audio. Unless your receiver comes with a secondary remote control for use in a second or third Zone, you will have to go to the receiver in your main room to switch sources. Multi-Zone home theater receivers can control either the same or a separate source than the one being listened to in the main room, in another location. How Do I Position Loudspeakers for My Home Theater System? I don't have the high wattage amp, however since the 2nd receiver has an inbuilt amp, thought of taking advantage of it. Connected the Surround/Center to another A/V. minimalist is right, pre-amp outputs are the way to go, but there's a small issue.You're limited to only the power output of your second amplifier, not the combined power of your two amps.

Restaurants With French Toast Near Me, Kimino Yuzu Sparkling Water, Japanese Pumpkin Pork Recipe, Watching The English Summary, Aarp Unitedhealthcare Login, Calories In 1/2 Cup Broccoli, Introduction To Logic And Critical Thinking Answers, Srm Management Quota Fees Quora, Grammar Activities For Adults,